The blocks of long lasting chlorine are highly concentrated (available chlorine 84% minimum) and make permanent chlorination of the pools possible. Their use has no effect on the pH, does not clog the filters and does not cause cloudiness in the water.
Pool Maintenance:
1 block (200 g) for 40 Cb.m. every 5 days. Partially or totally dissolved, the block of chlorine carries out chlorination for 5 days. Place the block in the skimmer basket of the pools or in a chlorine dispersal float. The dosages given are approximate. It is advisable to regularly check the pH as well as the chlorine level and to adjust them if necessary. The pH should be kept about 7.2. The chlorine level should be between 0.5 and 2 ppm.
Try chlorine lasing
Long lasting chlorine to high concentration chlorine (with no less than 84% available chlorine) and long time swimming pool sterilization. It does not affect the PH value. Does not cause the filter system to clog And does not make the water cloudy
To care for water conditions:
Chlorine 1 cube (200 grams) per 40 cubic meters of water every 5 days, try the chlorine casting will gradually dissolve, add the chlorine cubes to the filter basket. The above consumption is approximate. PH value and chlorine should be measured and adjusted if necessary, pH value should be adjusted to 7.2 Chlorine level should be between 0.5 and 2 ppm.
TH
EN
en
th